Description
In Stock & Ready to Ship
Part #TUF175-6507
Tuttnauer Part #FIL075-0020
WATER FILTER
This is an Original Tuttnauer Part - Not An After-Market Product
- Plastic Filter
- Use With ULKA Pump
- Includes Filter & 2 Plastic Nuts
Fits: Between Water Reservoir & Water Pump
Model This Part Fits: Tuttnauer 3870EA Autoclave
Changing This Filter Is Easy - Only Tool Needed Is A Screwdriver to Remove The Cabinet So You Can Get To The Filter
How To Remove The Old Tuttnauer Water Filter:
- Unplug Autoclave From The Wall & Remove The Cabinet
- Unscrew the nuts located on each end of the filter by grabbing the knurled portion of the nut and turning them counterclockwise
- Pull the tubing off of the filter and discard the filter
- Remove the Nuts from the tubing and discard
How To Install the Replacement Tuttnauer Water Filter:
- Slide the new nuts over the ends of the tubing with the knurled side facing the filter
- Insert the barbed ends of the new Filter into the tubing (smaller end of filter pointing towards Water Reservoir
- Screw the nuts onto the filter by turning them clockwise (finger-tight should be sufficient)
- Run a test cycle and watch for leaks at either end of the filter. Tighten Nuts as needed to stop leakage if any
- Replace The cabinet
