How To Clean The Tuttnauer Filter Screen

Tuttnauer Filter Screen Cleaning

On Tuttnauer models with serial numbers beginning with 93 and continuing to numbers beginning with 96 there is a brass disk on the rear of the machine.

This disk is held in place with (3) three 3mm Allen screws and holds the Filter Screen in place

Before removing these screws make sure the Chamber and Reservoir are empty of any water

• Remove the (3) three Allen screws and the brass disk
• Remove the Filter Screen and clean any dirt and debris
• Reinstall the Filter Screen and brass disk and secure with the three Allen screws

On models with serial numbers beginning with 00, there is a Chrome cap at the rear of the autoclave

Behind this cap is a Filter Screen



Before removing the cap make sure the Chamber and Reservoir are empty of any water

• Unscrew the cap
• Remove the Filter Screen and clean any dirt and debris
• Reinstall the Filter Screen and tighten down the cap

On units with serial numbers starting with 97 and continuing until 99 the only Filter was a plastic screen in the fill hole inside the Chamber