Description
Used By Professional Autoclave Repair Technicians World Wide
EASY TO USE FIELD SERVICE CALIBRATION SMART KIT
Part #MIK074-5892
FIELD SERVICE CALIBRATION SMART KIT
Model(s) This Part Fits: This One Kit Can Be Used To Service Both The Midmark M9 & The Midmark M11 Autoclaves!
For Use on Midmark M9 Autoclaves With Serial Number Prefixes: CZ, DA, DB, DX, DY, FD & OM), M9D (S/N Series: FF & FG) And Midmark M11 Autoclaves With Srial Number Prefixes ES, ET, FP, FR & GB), M11D (S/N Series: GC & GD)
Easy To Follow Step-By-Step Directions Included
This kit is required when you get the Error Code "009" and when recalibration is required.
| Error code |
Symptom |
Probable Cause |
Check |
Procedure |
| Error Code 9 |
Door opens at end of cycle
Door is manually opened at end of cycle |
Zero pressure potentiometer out of calibration |
Check calibration of zero pressure potentiometer |
Adjust zero pressure potentiometer
Click Here For Instructions |
| |
Door does not open at end of cycle |
Latch lever & pulse solenoid plunger mechanism malfunctioning |
Perform Midmark M9/M11 Door Opening Test
Click Here For Instructions |
Remove any debris or buildup from latch lever & pulse solenoid mechanism. |
| |
|
Door pins and latch bracket not functioning properly |
Check for burrs on door pins and latch bracket in door |
Remove burrs; then clean and lube with lithium based grease |
| |
Zero pressure potentiometer out of calibration |
Check calibration of zero pressure potentiometer |
Adjust zero pressure potentiometer
Click Here For Instructions |
| |
Door is closed when error is detected |
Door was closed during Dry cycle |
|
Inform operator not to shut door during Dry cycle |
"Midmark M11D Autoclave Repair Made Simple™"
