Midmark M11D Ultraclave DOOR GASKET (Door Seal)

Description

Part #MIG028-5888
OEM Part #053-0527-00

DOOR GASKET

• 12.875
• Red Silicone
• Included In The Midmark M11D Autoclave Sterilizer PM Kit (Part #MIK080-5894)

Fits: Door
Model This Part Fits: Midmark M11D Autoclaves

So, where's the wire?

The original Midmark Door Gaskets require a wire to hold them in place - ours do not....Because they are not needed with our New & Improved Midmark M11D Door Gaskets!

When you order one of ours, you can throw the wire away (using the wire on one of our door gaskets will cause a leak). All you need is our Door Gasket

View Installation Instructions Below

Notes: Replace the Dam Gasket Part #MIG036-5889 at the same time ... To perform a complete annual PM, Get the Midmark M11D Autoclave Preventative Maintenance Kit Part #MIK080-5894)

1. Remove the old door gasket
2. Clean the gasket groove in the door, and chamber face
3. For easy installation of the new gasket, use the “South-East-West-North” method (i.e. begin installing the gasket at the bottom of the door, then install the left and right sides and finishing at the top by squeezing in any of the excess making sure that the gasket fits flush)