Midmark M7 TEMPERATURE GAUGE ASSEMBLY

Description

Part #RCG085-789
Midmark Part #H002-0242-00

TEMPERATURE GAUGE

• 2" Dial Face
• Stem: 5" lg.
• Reads: 80˚ F - 276˚ F (24˚ C - 134˚ C)
• Mounts to front panel
• Includes All Parts As Shown

Model This Part Fits: Midmark M7 Autoclave

How To Remove The Midmark M7 Temperature Gauge

1. Remove cover assembly (Click Here For Instructions)
2. Loosen nut (1) and slide retaining bar (2) away from front panel (3).
3. While holding connector (4), loosen compression nut (5).
4. Pull temperature gauge (6) out of connector (4).
5. Remove Thermometer Sleeve (7), compression nut (5), nut (1), and retaining bar (2) from temperature gauge (6)

How To Install The Midmark M7 Temperature Gauge

1. Install retaining bar (2), nut (1), compression nut (5), and Thermometer Sleeve (7) on temperature gauge (6).
2. Making sure temperature gauge is oriented properly so face of gauge can be read by operator, position temperature gauge (6) on front panel (3) and secure with retaining bar (2) and nut (1).
3. Slide thermometer sleeve (7) against connector (4).
4. Install compression nut (5) on connector (4). Tighten compression nut until thermometer sleeve just starts to protrude out back side of compression nut. Do not tighten any further.
5. Install cover assembly (Click Here For Instructions)