Description
Part #MIG027K-3380
Midmark Part #002-0361-01
Midmark M9 Door & Dam Gasket Kit
Model This Part Fits: Midmark M9 Autoclaves
So, where's the wire?
The original Midmark Door Gaskets require a wire to hold them in place - ours do not....Because they are not needed with our New & Improved Midmark M9 Door Gaskets!
Made Better: Do Not Use the Metal Ring with Our Door Gaskets. The Door Gasket Has Been Engineered to Eliminate the Metal Ring
When you order one of ours, you can throw the wire away (using the wire on one of our door gaskets will cause a leak). All you need is our Door Gasket.
Includes
Get Everything You Need For Annual Preventative Maintenance With Our Midmark M9 PM Kit Part #MIK072-1205
If You See Steam Leaking Around The Door
Then this Door & Dam Gasket Kit Is What You Need To Fix It
The Door & Dam gaskets should be replaced immediately if leakage is noticed. The leakage will usually result in an aborted cycle and a Pressure Related error code
When this happens, your instruments Will Not be sterilized
Click Here For Instructions On How To Install Your New Door Gasket
Click Here For Instructions On How To Install Your New Dam Gasket It is recommended you replace the Door & Dam Gasket every 12 months
If your Midmark M9 Autoclave has a Shelf above the Dam Gasket as shown in the picture below, you need the MIG157K-8155 Door & Dam Gasket Kit
