Midmark M9 VENT SOLENOID VALVE (7 Watt) FITS CZ1000 thru CZ1109

Description

Part #MIS045-1215
Midmark Part #014-0199-00

SOLENOID VALVE (VENT) MANIFOLD MOUNT (COMPLETE VALVE ASSEMBLY

• Manifold mount
• 1/8 orifice
• 120V/ 60Hz., 7W
• 5/16-24 THD
• Mounts on manifold assembly
• Includes O-rings

Model(s) This Part Fits: Midmark M9 Autoclave

Fits M9-001 thru -019 with Serial Numbers CZ1000 thru CZ1109

Notes: Also Available Is the Vent Valve Repair Kit Part #MIK055-1202

How To Remove The Vent Solenoid Valve

1. Drain water from condensing tank.
2. Remove back panel (Click Here For Instructions)
3. Tag and disconnect two wires (1) from terminals (3)
4. Tag and disconnect two wires (2) from terminals (4)
5. Disconnect three tubes (5 thru 7) from elbows (8 thru 10)
6. Remove two screws (11) from bottom of manifold assembly (12) (NOTE: Spacer (12A) is only on newer units
7. Remove manifold assembly (12) and spacer (12A) from base (13)
8. Hold screw (1) and loosen nut (2). Turn terminals out of the way
9. Remove assembled vent solenoid (3) and elbow (4) from tee (5)
10. Remove elbows (4 and 6) from vent solenoid (3)

How To Install The Vent Solenoid Valve

1. Coat the threads of elbows (4 and 6) with Teflon tape (NOTE: The end of elbow (6) which receives a tube does not get coated with Teflon tape
2. Install elbows (4 and 6) on vent solenoid (3)
3. Hold screw (1) and loosen nut (2). Turn terminals out of the way
4. Install assembled elbow (4) and vent solenoid (3) on tee (5)
5. Turn terminals of vent solenoid (3) so wires will connect easily to vent solenoid
6. Hold screw (1) and tighten nut (2)
   
   Warning When installing the vent solenoid, the side of the solenoid marked IN needs to be connected to the pressure line. Reversing vent solenoid will cause system failure
    
7. Install spacer (12A) and manifold assembly (12) on base (13) and secure using two screws (11)
8. Connect three tubes (5 thru 7) to elbows (8 thru 10)
9. Connect two wires (2) to terminals (4)
10. Connect two wires (1) to terminals (3)
11. Install back panel (Click Here For Instructions)
12. Refill condensing tank with distilled water