Statim 2000 Waste Bottle Kit

Scican Statim 5000, 2000 and more!

 

Are You Ordering the Right Parts for Your Scican Statim Autoclave?


Whether you own a Statim 2000 or a Statim 5000 Sterilizer, it is important for you to know that the parts you are ordering fixes the problem(s) you are experiencing. While we are a strong proponent of having spare parts on hand in case of a breakdown, they are useless if they do not resolve the issues you are facing right now

When your autoclave is not functioning properly, you are faced with a lot of uncertainty: Who Can You Call To Fix It? How Long Will The Repair Take? How Will Your Practice Survive Without It? Where Can You Find a Rental or Loaner So You Can Stay In Business? How Much Is The Repair Going To Cost? Are You Going To Get Taken Advantage Of? Are You Going To Get Ripped Off?

It's enough to keep you awake at night!

And so you came here looking for answers. You know there has to be a better way...and you just found it. You can take control, right now! With our experienced repair staff and our highly trained autoclave engineers, we offer the best support network you will find anywhere. So, with our help, you can be sure you that not only are you ordering the right parts, but the solution to the problems you are dealing with.

Plus, once you receive your order, you will be able to approach the repair with confidence, knowing all parts we sell are new, of the highest quality and fully guaranteed. And, we will be here to support you if you need us

AllClaveParts is the Totally Awesome One-Stop Resource Spot For Taking Control of the Repair & Maintenance of your Statim 2000 & Statim 5000. So, if you have not taken advantage of our support network already, and unsure if the part(s) you are ordering will take care of the problems with your autoclave......just browse through our Statim Troubleshooting Guides. And if that is not enough, feel free to Contact Us, we are always happy to help!

Did we mention....all of this First Class Support is Free!

 

CONDENSER WASTE BOTTLE KIT INSTALLATION INSTRUCTIONS


Our New "User-Friendly" Condenser Waste Bottle Kit with Quick Disconnect for Easy Bottle Release


Installing your New Waste Bottle Kit is easy! Simply follow these step-by-step directions
  1. Remove original Teflon exhaust tubing from the back of the sterilizer. IMPORTANT: Our new quick connect will not function properly if used with the Statim orginal tubing. Only use our Nylon tubing included with the kit
  2. Unscrew lid of the bottle. Remove lid with attached condensation coil from bottle. Remove the "bubble" wrap that is located inside the bottle. Replace lid with attached condensation coil and screw lid securely back onto bottle
  3. Fill bottle with tap water according to instructions located on front side of bottle
  4. Attach the end of the new exhaust tubing with the quick connect to the connector on the top of the bottle. IMPORTANT: When locking the quick connect in place, listen for a "click" to ensure proper seal
  5. Attach the other end of the new exhaust tubing to the Push-In Elbow Fitting Part #RPF363-243 that is located on the back of the sterilizer. IMPORTANT: Be sure to push tubing completely into fitting, then pull-back on the tubing to ensure a proper seal
  6. Use the included cord clips to secure the exhaust tubing as needed
Easy Installation of your new Waste Bottle Kit

Note: Don't have the Elbow Fitting Part #RPF363-243 on your Statim 2000? Add it to your order today! It Allows you to push the sutoclave closer to thw wall and gives you more counter space


allclaveparts.com widget logo