Statim 2000 AIR COMPRESSOR KIT

Description

• Air Compressor
• Check Valve Kit Part #SCK011-246
• Cable Ties Part #RPT083-994 and mounting hardware

Air Compressor Specifications:

• 28mA @ 115VAC; 50/60 HZ
• Rated Air Flow: 0.177 cfm
• Rated Pressure: 2.84 psig
• Wire leads: 22" long

Save More than $800. If you were to send your Statim out for this repair, it would cost you more than $1500.00......and it would probably take a month for you to get it back!

With our easy to follow, step-by-step guide, you will find this is a procedure you can easily do, and do very quickly...... but even if you were to run into a snag, we will be here to guide you through it

Why Do We Include A New Check Valve?

A leaky check valve can cause moisture or steam to seep inside a compressor, causing the compressor to fail. And this is most likely the reason you are having to replace the compressor now

To avoid this problem, replace the check valve when replacing the compressor (Not Replacing the Check Valve with the one included in this Compressor Kit will Void Your Warranty)

The replacement Check Valve Tubing included in this Kit Part #SCK011-246) is translucent - making it easy to see a leaky check valve

Note: Follow Statim Recommendations and Replace the Check Valve Every 2 Years to extend the life of your Compressor