Statim 5000 Check Valve Installation Guide

Scican Statim 5000, 2000 and more!

 

Are You Ordering the Right Parts for Your Scican Statim Autoclave?


Whether you own a Statim 2000 or a Statim 5000 Sterilizer, it is important for you to know that the parts you are ordering fixes the problem(s) you are experiencing. While we are a strong proponent of having spare parts on hand in case of a breakdown, they are useless if they do not resolve the issues you are facing right now

When your autoclave is not functioning properly, you are faced with a lot of uncertainty: Who Can You Call To Fix It? How Long Will The Repair Take? How Will Your Practice Survive Without It? Where Can You Find a Rental or Loaner So You Can Stay In Business? How Much Is The Repair Going To Cost? Are You Going To Get Taken Advantage Of? Are You Going To Get Ripped Off?

It's enough to keep you awake at night!

And so you came here looking for answers. You know there has to be a better way...and you just found it. You can take control, right now! With our experienced repair staff and our highly trained autoclave engineers, we offer the best support network you will find anywhere. So, with our help, you can be sure you that not only are you ordering the right parts, but the solution to the problems you are dealing with.

Plus, once you receive your order, you will be able to approach the repair with confidence, knowing all parts we sell are new, of the highest quality and fully guaranteed. And, we will be here to support you if you need us

AllClaveParts is the Totally Awesome One-Stop Resource Spot For Taking Control of the Repair & Maintenance of your Statim 2000 & Statim 5000. So, if you have not taken advantage of our support network already, and unsure if the part(s) you are ordering will take care of the problems with your autoclave......just browse through our Statim Troubleshooting Guides. And if that is not enough, feel free to Contact Us, we are always happy to help!

Did we mention....all of this First Class Support is Free!

 

Detecting a leaky check valve just got easier. The AllClaveParts tubing used in this kit is transparent, making a leak easy to detect!

Early detection of a leaky check valve can prevent a costly repair. Transparent tubing … it’s the AllClaveParts Advantage!

In addition, the transparent tubing can be cut to size so that this Kit fits all Statim 5000 Models

How To Replace The Statim 5000 CHECK VALVE


The AllClaveParts Advantage

  1. Turn off and unplug the autoclave
  2. Remove the tubing connecting the Check Valve to the compressor
  3. Use a 7/16" Open End Wrench to secure fitting on boiler and remove the Check Valve using a 1/2" Open-End Wrench
  4. After the Check Valve is removed, clean any debris from the boiler fitting. Warning: Incomplete removal of all debris from the boiler fitting before installing new check valve may result in valve failure
  5. Apply approximately 3-4 drops of the enclosed Threadlocker 545 (Part #RPA369) to completely cover the threads on the boiler fitting
  6. Install new Check Valve hand-tight onto boiler fitting. Use a 7/16" Open-End Wrench to secure the boiler fitting and tighten the new Check Valve with a 1/2" Open-End Wrench (approximately 3-4 turns)


    7. CAUTION Care must be exercised to ensure that fittings on boiler are properly wrenched when loosening or tightening mating fittings. Failure to do so may result in damage to the fitting on the boiler. If damage occurs, it will be an expensive repair that can only be made at the Factory's repair (Scican) facility. There are no "field serviceable" options for this type of damage

  7. Cut the new transparent tubing (Part# RPT373) to size and secure to the barb fitting on the check valve and air compressor using the Hi-Temp Wire Ties (Part #RPT480) provided
  8. Run a test cycle or two to ensure machine runs properly
Statim 5000 Check Valve Installation




Statim Autoclave Repair Made Simple ™

allclaveparts.com widget logo