Description
THIS PART IS NO LONGER AVAILABLE
Part #SPH002-2546
OEM Part #P77117-31
HEATING ELEMENT
- 120VAC, 1200W, ~12 Ohms
- Includes
heating element, (2) 7/16-28 hex nut, (2) copper-fiber washer, (2)
steel washer, (4) No. 6 washer, and (4) 6-32 terminal nut
Fits: Bottom of chamber
Model(s) This Part Fits:
750, 750
How To Test The Spectroline 750 Heating Element
This test consists of measuring the amount of resistance in the element. To
do this, first, turn the autoclave off and unplug it from the wall
WARNING: CURRENT MUST NOT BE PRESENT WHEN MEASURING RESISTANCE.
Set your volt/ohm meter on 200 ohms (200 NOT 200k). The ohms range is located within the Omega
(O) (look for this symbol) section of your meter. It is also the area with "k" ranges
(ie: 2000k,. 200k, 20K and then 2000, 200).
Place a probe from the volt/ohm meter on each of the 2 terminals on the element (it really
doesn't matter which color probe goes where).
|
For the heating element to be good, it must fall within the resistance range in this table
(between 10.800 - 13.2000 ohms)
If your reading is outside of this range, then it is defective and needs to be replaced.
|
|
Model
|
Volts
|
Watts
|
Amps
|
Resistance
|
Resistance Range
|
Spectroline 750
|
120v
|
1200 Watts
|
10.00 amps
|
~12.00 Ohms
|
Between 10.8000
-
13.2000 ohms
|
