1730EK AIR JET VALVE (BLACK TOP)

Description

Part #TUJ034-9317
Tuttnauer Part #CT842010

AIR JET VALVE (BLACK TOP)

• 1/8-28 BSP thread (Base Measures 0.375" (3/8))
• Black top
• 10 mm hex
• Stainless steel
• Also included in Safety Valve Holder Kit Part # TUK054-751 (For 37 psi Safety Valve) & Part # TUK078-754 (For 40 psi Safety Valve)

Fits: Safety Valve Holder
Model This Part Fits: Tuttnauer 1730E Autoclaves

Replacing the Air Jet Valve on the Tuttnauer 1730EK is a pretty straightforward task and something you, or a member of your staff, should be able to do quickly.

Remove The Old Air Jet Valve

1. Remove the old Air Jet Valve using a 10mm wrench
2. Remove any old Teflon tape or debris from the valve holder

Install The New Jet Valve

1. Wrap Threads of New Air Jet Valve With Teflon Tape (Its best to use 1/4" wide Teflon tape)
2. Install the new air jet valve flush into the valve holder. Be sure the wire moves freely.

Service Tip: It is necessary to remove any accumulated dirt and debris. A dirty air jet valve can cause a failed spore test. For best results, move the wire back and forth ~10 times at least once a week or during refilling of the water reservoir.