1730MK HEATER ELEMENT (230V)

Description

Part #TUH016-3161
Tuttnauer Part #01720012

HEATER ELEMENT

• 450W, 230VAC, ~117Ω
• Includes heater mounting strap and Attaching Hardware ( Part # TUH015-3160)
• Hardware and heater mounting strap are stainless steel

Fits: Chamber

Click Here For Step-By-Step Instructions For Replacing Your Tuttnauer 1730MK Heating Element

Model(s) This Part Fits: 1730MK Autoclave

• When replacing a Heater, a burning smell may be present for several cycles. This is normal and does not indicate any malfunction of the new Heater.


• Current Heaters offered by AllClaveParts and Tuttnauer are designed to accommodate Safety Thermostats that use 3/16" diameter bulbs.
  
  When replacing the Heater band that mounts the Safety Thermostats to the Chamber, take a moment to measure the diameter of the Safety Thermostat bulbs.
  
  If the bulbs are 1/8" diameter (original style), then replace them with the newer style 3/16" diameter bulbs to ensure proper contact to the Chamber and the heater band.


• Make sure that the bulb for the automatic reset Safety Thermostat is installed in the lower groove of the Heater band, and that the bulb for the manual reset  thermostat is installed in the upper groove.


• When installing new Heater bands, tighten all bolts evenly until the band is snug against the Chamber. Run the sterilizer through several test cycles and then retighten the hardware to ensure proper fit. Failing to properly tighten Heater Bands can lead to premature failure.