Description
Part #TUF071-1930
OEM Part #04203801
AXIAL FAN
- 3.15" square x 1" wide
- 0.15A @ 12VDC
- Airflow: 32 CFM
- Dual ball bearings
- 2500 RPM
- Includes connector
Fits: Chassis
Model(s) This Part Fits: Tuttnauer 2540EH
How To Replace The Fan On The Tuttnauer 2540EH
Replacing The Tuttnauer 2540EH Fan Is Not Difficult, Nor Does It Require Any Special Tools (Just a Screwdriver). To Replace The Fan, Follow These Easy Step-By-Step Directions:
- Unplug the autoclave
- Remove the Outer Cabinet
- Disconnect the flat ribbon cable and the green ground wire going to the Front Console Panel
- Remove the Front Console Panel (one screw on top, one screw on the bottom)
- Disconnect all connectors going to the Electronic Box
- Remove the Electronic Box (one screw on top, two screws on the bottom)
- Disconnect the Fan from JP5 or JP10 or JP15 depending on the model autoclave
- From the bottom of the Electronic Box remove the four screws holding the Fan
- Replace the Fan
- Repeat the previous steps in the reverse order to reassemble the unit
Tech Tip: To Keep The Fan Replacment Procedure Quick & Simple, We Recommend You Do Not Remove The Old Fan Until You Have The New One In Hand.
