Midmark M9 & M11 Error Code C010: POWER MODE
| Display/Symptom |
Cause |
What to Check |
Solution |
C010: POWER MODE
SYSTEM PWR LOSS
ITEMS NOT STERILE
PUSH STOP TO RESTART
|
Power interruption
Unit lost power for a few seconds during Fill, Heat-Up, or Sterilization Mode |
Check power cord connections
Check voltage supply to assure outlet is on a dedicated, properly rated circuit. |
Secure power cord connections. Unplug unit for 60 seconds, then plug unit into a dedicated, properly rated circuit
(Power interruption could be due to an electrical storm, brown out, etc.) |
|
Loose / damaged wire connection(s) |
Check wire connections at these locations:
- J5 on main PC board
- AC receptacle terminals
|
Secure, repair or replace loose or damaged connections |
