Why Won't It Let You Select A Cycle?
This Guide Applies Only To Newer Style M9, M9D, M11, and M11D Autoclaves (Model Numbers 020 thru 022)
| Display/Symptom |
What to Check |
Solution |
CAN NOT SELECT A CYCLE
Autoclave Is Turned On - "SELECT CYCLE" Appears On Display but KEYPAD Does Not Respond When Pressed |
Turn the unit off. Unplug unit from outlet. Wait 60 seconds and then plug it back in and restart. This causes the system to reset. Try To Select A Cycle Again |
If KEYPAD is still unresponsive, Replace KEYPAD |
Find The Replacement KEYPAD For Your Midmark Autoclave Here
Please Note: While The KEYPAD is the most common cause, it could also be the PC Control Board
