Error Code "C001"
(Low Water Error)
Applies to M9D & M11D Autoclaves Only
| Display/Symptom |
Cause |
What to Check |
Solution |
| Cycle Will Not Run, Water Reservoir Is Full |
- Fill Solenoid Valve Malfunctioning or is Stuck
- Water level Sensor Dirty or Malfunctioning
|
- Check Resistance of Fill Solenoid Valve Coil
- Clean Water Level Sensor & Then Perform a Continuity Test
|
- Replace Fill Solenoid Valve
- Replace Water Level Sensor
|
