Midmark M9 & M11 Error Code E007
| Display/Symptom |
Cause |
What to Check |
Solution |
Error code 7
[Display pressure dropped below 24.5 psi (169 kPa)] |
- Slow Pressure Leak
- Sterilizer Potentiometers out of Calibration and/or Dirty Temperature Sensor
- Temperature Sensor Malfunctioning
|
- Check For Pressure Leaks (Click Here for Instructions on How To Locate Pressure Leaks)
- Clean Temperature Sensor; then Check Calibration using Our Midmark Calibration Kit For Field Sevice
- Check Calibration using our Midmark Calibration Kit For Field Service
|
- Replace Malfunctioning Component at Pressure Leak
- Perform Temperature / Pressure Potentiometer Adjustment
- Replace Temperature Sensor Assembly
|
