Skips Fill Cycle

You Will Need To Determine Which Malfunction You Are Experiencing Before Proceeding - Does the autoclave: Skip the Fill Cycle, or Fills slowly, or Overfills?

Autoclave Skips Fill Cycle
Goes Directly To Heat Up Mode When Start Button Depressed


Display/Symptom Cause What to Check Solution
Skips Fill Cycle
  1. Water Level Sensor is Wet from Previous Cycle
  2. Water Level Sensor is Dirty
  3. Water Level Sensor is Defective
  3. Test Water Level Sensor
  1. Dry Water Level Sensor with Cloth or Allow To Air Dry
  2. Clean Face of Water Level Sensor With Abrasive (Scotch-Brite) Pad & Dry With Cloth
  3. Replace Water Level Sensor

allclaveparts.com widget logo