Water Fills Slowly

You Will Need To Determine Which Malfunction You Are Experiencing Before Proceeding - Does the autoclave: Skip the Fill Cycle, or Fills slowly, or Overfills?

Chamber Fills Very Slowly


Display/Symptom Cause What to Check Solution
Takes a long time to Fill
  1. Filter / Tubing plugged
  2. Water Level Sensor Inside Chamber is Malfunctioning or Dirty
  1. Remove Filter and Tubing and Inspect
  2. Unplug Sensor from PC board & Jumper Connection on Board. Check for Proper Operation
  1. Replace / Clean Filter and/or Tubing
  2. Replace / Clean Water Level Sensor

allclaveparts.com widget logo