Tmperature Will Not Go Above 215 °F

This Troubleshooting Guide is applicable for the following Midmark Autoclave Model Numbers: M9-001 thru -019, M9D-001 thru -019, M11-001 thru -019, M11D-001 thru -019

Notice Red Led Display


If Your Midmark has a Red LED Display as shown above, then this is the right guide for you

Temperature Does Not Go Above 215°F (101°C)


Display/Symptom Cause What to Check Solution
Autoclave Will Not Complete Sterilization Cycle
  1. Slow Pressure Leak
  1. Check For Pressure Leaks
  1. Replace Malfunctioning Component at Pressure Leak

allclaveparts.com widget logo