Statim Cycle Fault 1
The cassette temperature failed to reach 95°;C within a time-out period
STAGE #1 - WARMING UP
| LCD Message |
Things To Check |
The steam generator/boiler did not heat up.
The cassette temperature (~95-102°) was not reached within ~3 minutes (or within the time out period). |
- The Most probable cause is a blown Thermal Fuse, Resulting in No power to boiler. Test Thermal Fuse For Continuity
- If Continuous, Fuse is Good...Move on to Next Possible Cause
- If Not continuous, Fuse is Bad..Replace Thermal Fuse
- An extremely large steam leak. Can be caused by over loading the cassette
- Can Also Be Caused By A Faulty Steam Generator Triac
|
