Description
Part #PCB001-553
Pelton Crane Part #004048
BELLOWS
Fits: Air Valve Housing
The Pelton Crane FL2 bellows is strictly a mechanical device, designed to remove air from the chamber.
As long as air remains in the chamber, the temperature inside cannot get much past the boiling point (212°), there will be little or no pressure, and sterilization cannot take place.
Here's how the bellows works: As long as the bellows senses air, it remains open. But when it senses steam, it closes until it senses air again. It repeats this process until all air is removed from the chamber.
Once all of the air has been removed from the chamber, the bellows will remain closed until your autoclave enters the vent cycle (the vent cycle opens the chamber and air is allowed to re-enter, which in turn causes the bellows to re-open)
The bellows loses efficiency and does wear out over time and should be changed every 12 months. As you can see, if it malfunctions, your instruments will not be sterilized. So, don't wait for it to fail. Replace it on schedule
