Midmark M7 PRESSURE RELIEF SAFETY VALVE

Description

Part #RCV051-866
Midmark Part #H98089 & 11683

PRESSURE RELIEF SAFETY VALVE

• Cracking Pressure: 31 PSI
• 1/8 MPT

Model This Part Fits:  Midmark M7 Autoclave - All Serial Numbers

NOTE:   The pressure relief valve is designed to open at 31 psi / 275 °F (135 °C). (5) With the TEMPERATURE REGULATOR knob set to its maximum setting, run a cycle. The temperature should reach normal maximum pressure / temperature of 27 psi / 270 °F (132 °C). If not, it indicates that the pressure relief valve is opening too early

Pressure Relief Valve Removal / Installation

Removal

1. Remove cover assembly NOTE: There may be a strip of tape holding the tank cover on to prevent the tank cover from vibrating and making noise. (2) Remove tank cover (1) from tank assembly
2. NOTE: The pressure relief valve can be mounted to tee (4) in two different locations depending if it is an old style or new style unit. (3) Remove pressure relief valve (3) from tee (4).

Installation

1.  Coat threads of pressure relief valve (3) with Teflon tape / sealant.
2.   Install pressure relief valve (3) on tee (4).
3.   Install tank cover (1) on tank assembly (2). (4) Install cover assembly