Description
Part #PCB001-988
Pelton Crane Part #004048
BELLOWS
Fits: Air Valve Housing
Model This Part Fits: Pelton Crane OCM Autoclave
Tech Tip: If it's been a while since the bellows was changed, getting the old bellows out of the back cap can be extremely difficult. Save yourself time and aggravation with a completely new install.
Don't Let This Happen To You:
""Thanks for getting everything to me so quickly, now I need another part. I broke the bellows off the old cap so I need a new cap, please send ASAP"
Order the Bellows Kit it includes the Bellows, the Bellows Cap & the Air Valve O-ring..... Everything you need for an easy & trouble free installation!
How The Pelton Crane OCM Bellows Works
The Pelton Crane OCM bellows is strictly a mechanical device, designed to remove air from the chamber.
As long as air remains in the chamber, the temperature inside cannot get much past the boiling point (212°), there will be little or no pressure, and sterilization cannot take place.
Here's how the bellows works: As long as the bellows senses air, it remains open. But when it senses steam, it closes until it senses air again. It repeats this process until all air is removed from the chamber.
Once all of the air has been removed from the chamber, the bellows will remain closed until your autoclave enters the vent cycle (the vent cycle opens the chamber and air is allowed to re-enter - which in turn causes the bellows to re-open)
The bellows loses efficiency and does wear out over time and should be changed every 12 months. As you can see, if it malfunctions, your instruments will not be sterilized. So, don't wait for it to fail. Replace it on schedule
Order the Pelton Crane OCM Bellows Kit: it includes The Bellows, The Air Valve O-ring & A New Bellows Cap
Order the Pelton Crane OCM Preventative Maintenance Kit- it includes the Bellows, Door Gasket, Filter Fill Line, and O-ring (everything you need at a discount)
Click Here For The Bellows Installation Instructions
"Pelton Crane OCM Autoclave Repair Made Simple™"
