Description
Part #STB002-6118
Stryker Part #870-1-13, 940-1-113 (Brush only), 38-49 (Spring only)
MOTOR BRUSH
- 2 per package
- Size: 3/16" x 3/16" x 1/2" long
- Spring length: 1.000"
- Includes Both A New Spring & Brush
Fits: Brush Holder Assembly
Model This Part Fits: Stryker 840 Cast Cutter
Replacing the Motor Brushes is easy.
- Insert a standard screwdriver into the slot on the Motor Brush Cap and turn it counter-clockwise
- Remove the Motor Brush Cap, the metal top cap, the spring and the old brush (turn the cast cutter over and lightly tap the housing and the parts will fall out
- Insert the new Motor Brushes into the opening, replace the Motor brush Caps into the openings and screw them down until tight
That's it! Your are ready to go back to work
Note: The Motor Brush Caps are made of plastic, it is a good idea to replace them at the same time as the Motor Brushes. You can find them by clicking Here Part #RPC039-6115
The Stryker 840 Cast Cutter has two motor brushes & caps (one on each side) - See the picture below
This is what it looks like after all of the motor brush parts have been removed
